Stingl, Michael

2024

• Bernhard D., Liers F., Stingl M.:
  Single and Joint Chance-Constrained Optimization with Continuous Distributions
  In: Informs Journal on Computing (2024)
  ISSN: 1091-9856
  URL: https://opus4.kobv.de/opus4-trr154/frontdoor/index/index/docId/532
• Bittner C., Bleyer G., Nees N., Carneiro M., Pflug L., Stingl M., Vogel N.:
  Optimizing Color Saturation in Colloidal Photonic Crystals by Control of Absorber Amount and Distribution
  In: Advanced Materials Interfaces (2024), Article No.: 2300986
  ISSN: 2196-7350
  DOI: 10.1002/admi.202300986
• Kuchlbauer M., Dienstbier J., Muneer A., Hedges H., Stingl M., Liers F., Pflug L.:
  Quality Control in Particle Precipitation via Robust Optimization
  In: Computers & Chemical Engineering (2024)
  ISSN: 0098-1354
  DOI: 10.1016/j.compchemeng.2024.108619

2023

• Greifenstein J., Letournel E., Stingl M., Wein F.:
  Efficient spline design via feature-mapping for continuous fiber-reinforced structures
  In: Structural and Multidisciplinary Optimization 66 (2023)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-023-03534-8
• Grieshammer M., Pflug L., Stingl M., Uihlein A.:
  Correction to: The continuous stochastic gradient method: part II–application and numerics (Computational Optimization and Applications, (2023), 10.1007/s10589-023-00540-w)
  In: Computational Optimization and Applications (2023)
  ISSN: 0926-6003
  DOI: 10.1007/s10589-023-00544-6
• Grieshammer M., Pflug L., Stingl M., Uihlein A.:
  The continuous stochastic gradient method: part I–convergence theory
  In: Computational Optimization and Applications (2023)
  ISSN: 0926-6003
  DOI: 10.1007/s10589-023-00542-8
• Hübner D., Herrnböck L., Wein F., Mergheim J., Steinmann P., Stingl M.:
  Buckling optimization of additively manufactured cellular structures using numerical homogenization based on beam models
  In: Archive of Applied Mechanics (2023)
  ISSN: 0939-1533
  DOI: 10.1007/s00419-023-02503-3
• Hübner D., Wein F., Stingl M.:
  Two-scale optimization of graded lattice structures respecting buckling on micro- and macroscale
  In: Structural and Multidisciplinary Optimization 66 (2023), Article No.: 163
  ISSN: 1615-147X
  DOI: 10.1007/s00158-023-03619-4
• Hübner D., Wein F., Stingl M.:
  Two-scale optimization of graded lattice structures respecting buckling on micro- and macroscale
  In: Structural and Multidisciplinary Optimization 66 (2023), Article No.: 163
  ISSN: 1615-147X
  DOI: 10.1007/s00158-023-03619-4
• Mergheim J., Breuning C., Burkhardt C., Hübner D., Köpf J., Herrnböck L., Yang Z., Körner C., Markl M., Steinmann P., Stingl M.:
  Additive manufacturing of cellular structures: Multiscale simulation and optimization
  In: Journal of Manufacturing Processes 95 (2023), p. 275-290
  ISSN: 1526-6125
  DOI: 10.1016/j.jmapro.2023.03.071
• Nees N., Pflug L., Mann B., Stingl M.:
  Multi-material design optimization of optical properties of particulate products by discrete dipole approximation and sequential global programming
  In: Structural and Multidisciplinary Optimization 66 (2023), Article No.: 5
  ISSN: 1615-147X
  DOI: 10.1007/s00158-022-03376-w
• Plass F., Englisch S., Apeleo Zubiri B., Pflug L., Spiecker E., Stingl M.:
  Using OpenBIS as Virtual Research Environment: An ELN-LIMS Open-Source Database Tool as a Framework within the CRC 1411 Design of Particulate Products
  In: Data Science Journal 22 (2023), Article No.: 44
  ISSN: 1683-1470
  DOI: 10.5334/dsj-2023-044
• Singh S., Pflug L., Mergheim J., Stingl M.:
  On optimization of heterogeneous materials for enhanced resistance to bulk fracture
  In: Forces in Mechanics 12 (2023), Article No.: 100200
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2023.100200
• Vu BN., Lukeš V., Stingl M., Rohan E.:
  A sequential global programming approach for two-scale optimization of homogenized multiphysics problems with application to Biot porous media
  In: Structural and Multidisciplinary Optimization 66 (2023), Article No.: 211
  ISSN: 1615-147X
  DOI: 10.1007/s00158-023-03659-w

2022

• Jaksch A., Spinola M., Cholewa S., Pflug L., Stingl M., Drummer D.:
  Thin-Walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model
  SFF 2022 (Austin, Texas, 25. July 2022 - 27. July 2022)
  DOI: 10.26153/tsw/44659
• Kuchlbauer M., Liers F., Stingl M.:
  Adaptive bundle methods for nonlinear robust optimization
  In: Informs Journal on Computing 34 (2022), p. 2106 - 2124
  ISSN: 1091-9856
  DOI: 10.1287/ijoc.2021.1122
  (Techreport)
• Meincke T., Walter J., Pflug L., Thajudeen T., Völkl A., Cardenas Lopez P., Uttinger M., Stingl M., Watanabe S., Peukert W., Klupp Taylor R.:
  Determination of the yield, mass and structure of silver patches on colloidal silica using multiwavelength analytical ultracentrifugation
  In: Journal of Colloid and Interface Science 607 (2022), p. 698-710
  ISSN: 0021-9797
  DOI: 10.1016/j.jcis.2021.08.161
  URL: https://www.researchgate.net/publication/354270035_Determination_of_the_yield_mass_and_structure_of_silver_patches_on_colloidal_silica_using_multiwavelength_analytical_ultracentrifugation
• Singh S., Pflug L., Mergheim J., Stingl M.:
  Robust design optimization for enhancing delamination resistance of composites
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.7168

2021

• Singh S., Pflug L., Stingl M.:
  Material optimization to enhance delamination resistance of composite structures using viscous regularization
  In: Computer Methods in Applied Mechanics and Engineering (2021)
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2021.113881
  URL: https://www.sciencedirect.com/science/article/pii/S0045782521002188
• Singh S., Stingl M.:
  Material optimization for controlling interfacial damage in composite structures
  In: Proceedings in Applied Mathematics and Mechanics 20 (2021)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.202000344
• Vu BN., Wein F., Stingl M.:
  Two-Scale Optimization and Generation of Anisotropic Cellular Designs in the Context of Additive Manufacturing
  In: Computer-Aided Design 140 (2021), Article No.: 103073
  ISSN: 0010-4485
  DOI: 10.1016/j.cad.2021.103073

2020

• Adelhütte D., Aßmann D., Gonzàlez Grandòn T., Gugat M., Heitsch H., Liers F., Henrion R., Nitsche S., Schultz R., Stingl M., Wintergerst D.:
  Joint model of probabilistic/robust (probust) constraints with application to gas network optimization
  In: Vietnam Journal of Mathematics (2020)
  ISSN: 0866-7179
  DOI: 10.1007/s10013-020-00434-y
  URL: https://link.springer.com/article/10.1007/s10013-020-00434-y
  (Techreport)
• Greifenstein J., Stingl M.:
  Topology optimization with worst-case handling of material uncertainties
  In: Structural and Multidisciplinary Optimization 61 (2020), p. 1377-1397
  ISSN: 1615-147X
  DOI: 10.1007/s00158-019-02411-7
• Pflug L., Bernhardt N., Grieshammer M., Stingl M.:
  CSG: A new stochastic gradient method for the efficient solution of structural optimization problems with infinitely many states
  In: Structural and Multidisciplinary Optimization (2020)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-020-02571-x
• Pflug L., Schikarski T., Keimer A., Peukert W., Stingl M.:
  eMoM: Exact method of moments—Nucleation and size dependent growth of nanoparticles
  In: Computers & Chemical Engineering 136 (2020), Article No.: 106775
  ISSN: 0098-1354
  DOI: 10.1016/j.compchemeng.2020.106775
• Semmler J., Stingl M.:
  On the efficient optimization of optical properties of particulate monolayers by a hybrid finite element approach
  In: Structural and Multidisciplinary Optimization (2020)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-020-02754-6
• Valentin J., Hübner D., Stingl M., Pflueger D.:
  GRADIENT-BASED TWO-SCALE TOPOLOGY OPTIMIZATION WITH B-SPLINES ON SPARSE GRIDS
  In: SIAM Journal on Scientific Computing 42 (2020), p. B1092-B1114
  ISSN: 1064-8275
  DOI: 10.1137/19M128822X

2019

• Aßmann D., Liers F., Stingl M.:
  Decomposable robust two-stage optimization: An application to gas network operations under uncertainty
  In: Networks (2019)
  ISSN: 0028-3045
  DOI: 10.1002/net.21871
  URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/net.21871
• Hübner D., Rohan E., Lukes V., Stingl M.:
  Optimization of the porous material described by the Biot model
  In: International Journal of Solids and Structures 156-157 (2019), p. 216-233
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2018.08.016
• Kufner T., Leugering G., Martin A., Medgenberg J., Schelbert J., Schewe L., Stingl M., Strohmeyer C., Walther M.:
  Towards a lifecycle oriented design of infrastructure by mathematical optimization
  In: Optimization and Engineering 20 (2019), p. 215-249
  ISSN: 1389-4420
  DOI: 10.1007/s11081-018-9406-5
• Kufner T., Leugering G., Semmler J., Stingl M., Strohmeyer C.:
  SIMULATION AND STRUCTURAL OPTIMIZATION OF 3D TIMOSHENKO BEAM NETWORKS BASED ON FULLY ANALYTIC NETWORK SOLUTIONS
  In: Esaim-Mathematical Modelling and Numerical Analysis-Modelisation Mathematique Et Analyse Numerique 52 (2019), p. 2409-2431
  ISSN: 0764-583X
  DOI: 10.1051/m2an/2018065
• Schlegel P., Kunduk M., Stingl M., Semmler M., Döllinger M., Bohr C., Schützenberger A.:
  Influence of spatial camera resolution in highspeed videoendoscopy on laryngeal parameters
  In: PLoS ONE 14 (2019), Article No.: e0215168
  ISSN: 1932-6203
  DOI: 10.1371/journal.pone.0215168
• Wein F., Chen N., Iqbal N., Stingl M., Avila M.:
  Topology optimization of unsaturated flows in multi-material porous media: Application to a simple diaper model
  In: Communications in Nonlinear Science and Numerical Simulation 78 (2019), Article No.: 104871
  ISSN: 1007-5704
  DOI: 10.1016/j.cnsns.2019.104871

2018

• Aßmann D., Liers F., Stingl M., Vera JC.:
  Deciding Robust Feasibility and Infeasibility Using a Set Containment Approach: An Application to Stationary Passive Gas Network Operations
  In: SIAM Journal on Optimization 28 (2018), p. 2489-2517
  ISSN: 1052-6234
  DOI: 10.1137/17M112470X
• Bley K., Semmler J., Rey M., Zhao C., Martic N., Klupp Taylor R., Stingl M., Vogel N.:
  Hierarchical Design of Metal Micro/Nanohole Array Films Optimizes Transparency and Haze Factor
  In: Advanced Functional Materials (2018)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.201706965
• Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
  Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
  iCAT 2018 (Maribor, 10. October 2018 - 11. October 2018)
  In: Proceedings of 7th International Conference on Additive Technologies 2018
• Klupp Taylor R., Meincke T., Sadafi FZ., Walter J., Pflug L., Watanabe S., Peukert W., Stingl M.:
  Anisometric engineering of particle interfaces: Multidimensional characterization and gram‐scale production
  ProcessNet‐Jahrestagung und 33. DECHEMA‐Jahrestagung der Biotechnologen 2018 (Aachen, 11. September 2018 - 13. September 2018)
  In: Chemie Ingenieur Technik (Special Issue: ProcessNet‐Jahrestagung und 33. DECHEMA‐Jahrestagung der Biotechnologen 2018), Weinheim: 2018
  DOI: 10.1002/cite.201855147
  URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/cite.201855147?af=R
• Pflug L., Stingl M.:
  Multi-Material Optimization of Nanoparticles by Discrete Dipole Approximation and Sequential Global Programming
  In: Thomas Wriedt, Yuri Eremin Eds. (ed.): Proceedings of the Bremen Workshopon Light Scattering: 2018, 2018
• Schlegel P., Stingl M., Kunduk M., Kniesburges S., Bohr C., Döllinger M.:
  Dependencies and Ill-designed Parameters Within High-speed Videoendoscopy and Acoustic Signal Analysis
  In: Journal of Voice (2018)
  ISSN: 0892-1997
  DOI: 10.1016/j.jvoice.2018.04.011
• Semmler J., Bley K., Klupp Taylor R., Stingl M., Vogel N.:
  Particulate Coatings with Optimized Haze Properties
  In: Advanced Functional Materials 5 (2018), Article No.: 1806025
  ISSN: 1616-301X
  DOI: 10.1002/adfm.201806025
  URL: https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.201806025
• Semmler J., Pflug L., Stingl M.:
  Material optimization in transverse electromagnetic scattering applications
  In: SIAM Journal on Scientific Computing 40 (2018), p. B85-B109
  ISSN: 1064-8275
  DOI: 10.1137/17M1127569
• Stingl M., Wein F.:
  A combined parametric shape optimization and ersatz material approach
  In: Structural and Multidisciplinary Optimization 57 (2018), p. 1297-1315
  ISSN: 1615-147X
  DOI: 10.1007/s00158-017-1812-3
• Wawra S., Pflug L., Thajudeen T., Kryschi C., Stingl M., Peukert W.:
  Determination of the two-dimensional distributions of gold nanorods by multiwavelength analytical ultracentrifugation
  In: Nature Communications 9 (2018), Article No.: 4898
  ISSN: 2041-1723
  DOI: 10.1038/s41467-018-07366-9

2017

• Meincke T., Bao H., Pflug L., Stingl M., Klupp Taylor R.:
  Heterogeneous nucleation and surface conformal growth of silver nanocoatings on colloidal silica in a continuous flow static T-mixer
  In: Chemical Engineering Journal 308 (2017), p. 89-100
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2016.09.048
• Werner S., Kurz M., Stingl M., Doell R.:
  Model-Based Optimization of Short Stroke Control in Roughing Mills
  In: Steel Research International 88 (2017), Article No.: 1700220
  ISSN: 1611-3683
  DOI: 10.1002/srin.201700220
• Werner S., Stingl M., Leugering G.:
  Model-based control of dynamic frictional contact problems using the example of hot rolling
  In: Computer Methods in Applied Mechanics and Engineering 319 (2017), p. 442-471
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2017.03.006
• Wormser M., Wein F., Stingl M., Körner C.:
  Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization
  In: Materials 10 (2017)
  ISSN: 1996-1944
  DOI: 10.3390/ma10101125

2016

• Greifenstein J., Stingl M.:
  Robust optimal component design unter consideration of local material defects
  In: Proceedings of the 6th international conference on additive technologies (iCAT 2016), Ljubljana: Interesansa - zavod, 2016
  ISBN: 978-961-285-537-6
• Greifenstein J., Stingl M.:
  Simultaneous parametric material and topology optimization with constrained material grading
  In: Structural and Multidisciplinary Optimization (2016), p. 1-14
  ISSN: 1615-147X
  DOI: 10.1007/s00158-016-1457-7
• Mitschke H., Schury F., Mecke K., Wein F., Stingl M., Schroder-Turk GE.:
  Geometry: The leading parameter for the Poisson's ratio of bending-dominated cellular solids
  In: International Journal of Solids and Structures 100 (2016), p. 1-10
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2016.06.027

2015

• Schury F., Greifenstein J., Leugering G., Stingl M.:
  On the efficient solution of a patch problem with multiple elliptic inclusions
  In: Optimization and Engineering 16 (2015), p. 225-246
  ISSN: 1389-4420
  DOI: 10.1007/s11081-014-9262-x
• Semmler J., Pflug L., Stingl M., Leugering G.:
  Shape Optimization in Electromagnetic Applications
  In: Aldo Pratelli, Günter Leugering (ed.): New Trends in Shape Optimization, Springer, 2015, p. 251-269 (International Series of Numerical Mathematics, Vol.166)
  DOI: 10.1007/978-3-319-17563-8_11

2014

• Greifenstein J., Stingl M.:
  Simultaneous Material and Topology Optimization Based on Topological Derivatives
  In: Christian Pötzsche, Clemens Heuberger, Barbara Kaltenbacher, Franz Rendl (ed.): System Modeling and Optimization, Berlin Heidelberg: Springer, 2014, p. 118-127 (IFIP Advances in Information and Communication Technology, Vol.443)
  DOI: 10.1007/978-3-662-45504-3_11
• Greifenstein J., Stingl M.:
  Simultaneous optimization of topology and build orientation in layered manufacturing
  In: 5th International Conference on Additive Technologies (iCAT), 2014